Autel MaxiDiag Elite MD701 Manuel d'utilisateur télécharger pdf (Page 57)

 For CAN-equipped vehicles, test results displayed can be as

below:

Figure 6.32

8) Press ESC button to return to the previous menus.

6.8 Component Test

The Component Test function allows initiating a leak test for the

vehicle's EVAP system. The scan tool itself does not perform the

leak test, but commands the vehicle's on-board computer to start

the test. Different vehicle manufacturers might have different

criteria and methods for stopping the test once it has been started.

Before starting the Component Test, refer to the vehicle service

manual for instructions to stop the test.

1) Use the UP/DOWN scroll button to select Component Test from

Diagnostic Menu and press the OK button. (Figure 6.3)

2) Wait for the scan tool to display the Component Test menu.

Figure 6.33

Component Test

1.EVAP Sys. Leak Test

Flow Test

Module

$10

Test Value

0.10

Min Limit

0.00

Max Limit

95.0

Status

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 89 90

Pas de commentaire

Autel MaxiDiag Elite MD701 Manuel d'utilisateur Page 57