Autel MaxiDiag Elite MD701 Manuel d'utilisateur télécharger pdf (Page 33)

5.3.3 Live Data

Live Data function enables you to view the “real-time” live data,

including the information of values (volts, rpm, temperature, speed

etc.) and system status information (open loop, closed loop, fuel

system, etc.) generated by vehicle sensors, switches and actuators.

NOTE: If the vehicle must be driven in order to perform a

troubleshooting procedure, ALWAYS have a second person help

you. One person should drive the vehicle while the other person

observes the Scan Tool data. It is dangerous to drive and operate

the Scan Tool at the same time because a serious traffic accident

might be caused.

1) To view live data, use the UP/DOWN scroll button to select

Live Data from Function Menu screen (Figure 5.27), and press

OK button. The screen will show as below.

Figure 5.27

 The number to the right of selected item indicates sequence of

this item.

 If you want to select the item, press Select button.

 To select all the items on the screen, press Select All button. To

clear all the selected items on the screen, press Clear All button.

2) Press the OK button to view the information.

………… ..Live Data

 MFF_RPM(Engine RPM)

□ MFF_SOAk(Engine Off Soak Time

Prior to Misfire)

 VEHICLE SPEED SENSOR

Select All Select Clear All

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 89 90

Pas de commentaire

Autel MaxiDiag Elite MD701 Manuel d'utilisateur Page 33