Table of Contents 1. SAFETY INSTRUCTIONS ... 1 1.1 WORK AREA SAFETY ...
8 G. DOWN Arrow Zoom Adjusting Button – Uses Down arrow button to zoom out while in the camera mode. Moves down through menu and submenu items
9 3. Installation and Connection 3.1 Battery Removal and Installation Note: If the power indicator light is blinking continuously, this remi
10 √ To install the batteries, remove the battery compartment and insert four (4) new AA batteries into the proper slots in the battery compartment. 4
11 3.4 Accessories Installation For MV208 (with 8.5mm imager head): The three accessories include magnet, hook and mirror (Fig. 2). All are attached
12 3.5 Micro SD card Installation NOTE: Micro SD card slot provides for additional memory, but Micro SD card is optional and not included. Differe
13 4. Operation Instructions Always wear safety eye protection to protect your eyes against dirt and other objects. Follow operation instructions to
14 of the tool and the other end of the cable to the video-in port of a TV to view a high quality real-time image. 4.2 Operation Precautions Use th
15 Do not drop the tool, if the tool is dropped accidently, check for the breakage and any other conditions that may affect its operation.
16 readable. Do not operate the tool without the caution label. Turn on the power and make sure the tool model through the splash screen and then d
17 inspection. The Imager head and cable were waterproof to a depth of 3m (10'), Greater depths may cause leakage into the imager head and ca
6. WARRANTY INFORMATION... 30 6.1 LIMITED ONE YEAR WARRANTY ...
18 Always handle the tool with care. It is not shock-resistant. Do not disassemble the tool beyond what is shown in the manual. Doing
19 backlighting. A brightness indicator bar will be displayed on the screen as you adjust brightness. (Fig. 14) Fig. 14 5) Zoo
20 Fig. 16 Color or Monochrome In the Setup screen, select Color or Monochrome and press OK button, then the Color or Monochrome setting sc
21 Fig.18 If you want to format the media (in most cases, it is the Micro SD card), use the LEFT/RIGHT button to select Yes, then
22 7) Entering the Secondary Settings Screen While in the Primary Settings Screen (Fig. 16), select Advanced Settings from Setup and then pre
23 Use the LEFT/RIGHT button to move to the desired dialog box, then use the UP/DOWN button to increase or decrease the number. When finished, p
24 Fig. 23 Use the UP/DOWN button to select the desired setting, then press OK button to save configuration and exit, or press Back button to
25 capturing video (Fig. 25). You will notice that a red REC icon appears at the top right portion of the screen, just below battery capacit
26 Pressing Play button, the captured photo and video files will display on the screen. (Fig. 27) Photos and videos captured will be saved at separa
27 While selecting a video to play, press OK button to start, suspend or resume the process. Anytime pressing BACK button will stop playing
1 1. Safety Instructions To prevent personal injury or damage to vehicles and/or the scan tool, read this instruction manual first and observe the fo
28 4.6 Icons 1) Battery Capacity – Fully charged battery. 2) Micro SD card – Indicates a Micro SD card has been inserted into the t
29 5. Troubleshooting Symptoms Possible Reasons Solutions Display is on, but does not show image. Cable connection is loose. Check and reattach. Imag
30 6. Warranty Information
2 ground fault circuit interrupter (GFCI) to protect supply. 1.3 Personal Safety Do not use the tool while tired or under the influence of drugs, a
3 2. Description, Specifications and Tool Components 2.1 Description This premier Autel MaxiVideoTM MV208 digital videoscope is an ideal tool for exa
4 Recording medium Micro SD card (Micro SD card is optional and not included) Image controls Zoom, low light vision Lighting Fully adjustable LED Cabl
5 2.4 Tool Components and Ports The MaxiVideoTM MV208 comes with the following items: Note: Because of continuing improvements, actual product
6 video-out cable to view the real-time image. 7) Mini USB Port – Connects the tool to a computer with the supplied USB cable to exchange inform
7 2.5 Buttons and Controls Fig. 4 A. LCD Screen – Indicates still images and videos. B. Trash Can/Reverse Button – Deletes captured photos and vide
Commentaires sur ces manuels